NCERT Solutions for Class 12 Chemistry Chapter 2 Solutions

Q: What are the important topics of this chapter?

Henry’s law Solubility of gases in liquids Colligative properties Raoult's law Relative lowering of vapour pressure Elevation of boiling point Osmotic pressure Abnormal molecular mass Van't Hoff factor

Q: Where can I find complete solutions of NCERT syllabus Class 12 Chemistry?

For complete solutions : https://school.careers360.com/ncert/ncert-solutions-class-12-chemistry

Q: What is the weightage of NCERT book Class 12 Chemistry chapter 2 in JEE Mains?

4 marks questions can be expected. Practice JEE Main previous year papers to understand the question type asked.

Q: What is the weightage of NCERT class 12 Chemistry chapter 2 in NEET?

Weightage of solutions is 5% . For good score follow NCERT textbook and solve NEET previous year papers.

Edited By Sumit Saini | Updated on May 25, 2022 - 4:57 p.m. IST | #CBSE Class 12th

NCERT Solutions for Class 12 Chemistry Chapter 2 Solutions- In NCERT Class 12 Chemistry chapter 2 Solutions, there are direct answers to the 41 questions which are there in the chapter exercise. The students will be able to find step-by-step NCERT solutions for Class 12 Chemistry Chapter 2 Solutions which will eventually help you to write good answers and get good marks in the CBSE exam. The NCERT solutions which are provided here are free of cost and are easily accessible. By referring to the NCERT solutions for class 12, students can understand all the important concepts and practice questions well.

Latest Updates for CBSE Class 12th

02 May 2022:
CBSE 12th Hindi Core and Elective exams Live updates, check exam analysis, pattern, marking scheme, etc.
28 Apr 2022:
CBSE Class 10, 12 term 2 2022 exam updates, check here.
22 Apr 2022:
Check out CBSE Class 12 syllabus 2023 term 1 and 2 here.

Stay up-to date with CBSE Class 12th News

In our daily life, we come across various mixtures like soft drinks, syrups, and air. All of them are mixtures of two or more pure substances like air is a mixture of mainly nitrogen and oxygen etc. Also, you know about various types of mixtures or solutions like gaseous solutions, liquid solutions, and solid solutions. These topics of NCERT solutions for Class 12 Chemistry Chapter 2 Solutions are not only important for the CBSE 12th exam but also for the various competitive exams like JEE Mains, NEET, BITSAT, VITEEE, etc.

Confused About What Career Option To Choose? Here’s How To Figure Out Your Best Fit

4 min read

Mar 05, 2022 Read More

Streamed Webinar

Careers In Sciences

01 Apr'22 05:00 PM to 01 Apr'22 06:00 PM IST

Dr. B. Ananthanarayan (Professor, Indian Institute of Science) +1More

Find NCERT Solutions for Class 12 Chemistry chapter 2 Solutions below:

Solutions to In-Text Questions Exercise 2.1 to 2.12

Question 2.1 Calculate the mass percentage of benzene $(C_{6}H_{6})$ and carbon tetrachloride $(CCl_{4})$ if $22\; g$ of benzene is dissolved in $122\; g$ of carbon tetrachloride.

Answer :

We know that solute and solvent forms solution.

So mass percentage of benzene (solute) :-

$=\frac{22}{22+122}\times100 = \frac{22}{144}\times100 = 15.28\%$

Similarly mass percentage of CCl ₄ :-

$=\frac{122}{22+122}\times100 = \frac{122}{144}\times100 = 84.72\%$

Question 2.2 Calculate the mole fraction of benzene in solution containing $30\%$ by mass in carbon tetrachloride.

Answer :

For calculating mole fraction, we need moles of both the compounds.

It is given that benzene is $30\%$ in the solution by mass.

So if we consider 100g of solution then 30g is benzene and 70g is CCl ₄ .

$Moles of CCl_{4}= \frac{Given\ mass}{Molar\ mass} = \frac{70}{154} = 0.4545\ mol$

$\left ( Molar\ mass\ of\ CCl_4 = 12 + 4(35.5) \right )$

Similarly moles of benzene :

$= \frac{30}{78} = 0.3846$ $\left ( Molar\ mass\ of\ benzene = 6(12) + 6(1) \right )$

So mole fraction of benzene is given :

$= \frac{0.3846}{0.3846+0.4545}$

$= 0.458$

Question 2.3(a) Calculate the molarity of each of the following solutions:

$30\; g$ of $Co(NO_{3})_{2}.\; 6H_{2}O$ in $4.3\: L$ of solution

Answer :

For finding molarity we need the moles of solute and volume of solution.

So moles of solute :

$= \frac{Given\ mass}{Molar\ mass} = \frac{30}{291} = 0.103$

1643795412760 $= 291\ g\ mol^{-1}$

Now, $Molarity = \frac{No.\ of\ moles\ of\ solute}{Volume\ of\ solution\ (l)}$

$= \frac{0.103}{4.3} = 0.023\ M$

Question 2.3(b) Calculate the molarity of each of the following solutions:

$30\; mL$ of $0.5\; M$ $H_{2}SO_{4}$ diluted to $500 \; mL$ .

Answer :

By conservation of moles we can write :

M ₁ V ₁ = M ₂ V ₂

Given that M ₁ = 0.5 M and V ₁ = 30 ml ; V ₂ = 500 ml

$M_2 = \frac{M_1V_1}{V_2} = 0.03\ M$

Question 2.4 Calculate the mass of urea $(NH_{2}CONH_{2})$ required in making $2.5 \; kg$ of $0.25\; molal$ aqueous solution.

Answer :

Let us assume that the mass of urea required be x g.

So moles of urea will be :

$Moles = \frac{Given\ mass}{Molar\ mass} = \frac{x}{60}\ moles$

$Molality = \frac{Moles}{Mass\ of\ solvent\ in\ Kg} = \frac{\frac{x}{60}}{2.5-0.001x} = 0.25$

we get x = 37

Thus mass of urea required = 37 g.

Question 2.5 Calculate

(a) molality

(b) molarity and

of KI if the density of $20\%$ (mass/mass) aqueous KI is .

Answer :

If we assume our solution is 100 g. Then according to question, 20 g KI is present and 80 g is water.

So moles of KI :

$=\frac{20}{166}$ $\left ( Molar\ mass = 39+127 = 166\ g\ mol^{-1} \right )$

(a) Molality :-

$Molality = \frac{Moles}{Mass\ of\ solvent\ in\ Kg} = \frac{\frac{20}{166}}{0.08}= 1.506\ m.$

(b) Molarity :-

$Density = \frac{Mass}{Volume}$

$Volume = \frac{Mass}{Density} = \frac{100}{1.202} = 83.19 mL$

$Molarity = \frac{Moles}{Volume(l)} = \frac{\frac{20}{166}}{83.19\times10^{-3}} = 1.45\ M$

(c) Mol fraction :- Moles of water :-

$= \frac{80}{18} = 4.44$

So, mol fraction of KI :-

$= \frac{0.12}{0.12+4.44} = 0.0263$

Question 2.6 a toxic gas with rotten egg-like smell, is used for the qualitative analysis. If the solubility of in water at STP is calculate Henry’s law constant.

Answer :

For finding Henry's constant we need to know about the mole fraction of H ₂ S.

Solubility of H ₂ S in water is given to be 0.195 m .

i.e., 0.195 moles in 1 Kg of water.

$Moles\: of\: water :=\frac{1000}{18} = 55.55\ moles$

$= \frac{0.195}{0.195+55.55} = 0.0035$

At STP conditions, pressure = 1 atm or 0.987 bar

Equation is : $p_{H_2S} = K_h\times x_{H_2S}$

So we get :

$K_h =\frac{0.987}{0.0035} = 282\ bar$

Question 2.7 Henry’s law constant for in water is $1.67\times 10^{8}\; Pa$ at $298\; K.$ Calculate the quantity of in $500\; mL$ of soda water when packed under $2.5\; atm$ pressure at $298 \; K.$

Answer :

We know that ,

$p = k_h\times x$

Pressure of CO ₂ = 2.5 atm

We know that : $1\ atm = 1.01\times10^5\ Pa$

So, Pressure of CO ₂ = $2.53\times10^5$ Pa

By Henry Law we get,

$x = \frac{p}{k_h} = \frac{2.53\times10^5}{1.67\times10^8} = 1.52\times10^{-3}$

Taking density of soda water = 1 g/ml

We get mass of water = 500 g.

So, Moles of water :

$= \frac{500}{18} = 27.78$

Also, $x_{H_2O} = \frac{n_{CO_2}}{n_{H_2O}+n_{CO_2}} \approx \frac{n_{CO_2}}{n_{H_2O}}$

So, moles of CO ₂ = 0.042 mol

Using relation of mole and given mass, we get

Mass of CO ₂ = 1.848 g.

Question 2.8 The vapour pressure of pure liquids A and B are $450$ and respectively, at $350\; K$ . Find out the composition of the liquid mixture if total vapour pressure is . Also find the composition of the vapour phase.

Answer :

Let the composition of liquid A (mole fraction) be x _A .

So mole fraction of B will be x _B = 1 - x _A .

Given that,

Using Raoult’s law ,

$p_{total} = p^{\circ}_A\ x_A\ +\ p^{\circ} _B\ (1-x_A)$

Putting values of p _total and vapour pressure of pure liquids in the above equation, we get :

600 = 450.x _A + 700.(1 - x _A )

or 600 - 700 = 450x _A - 700x _A

or x _A = 0.4

and x _B = 0.6

Now pressure in vapour phase :

$P_A = p^{\circ}_A\ x_A$

= 450(0.4) = 180 mm of Hg

$P_B = p^{\circ}_B\ x_B$

= 700(0.6) = 420 mm of Hg

$Mole\ fraction\ of\ liquid\ A = \frac{P_A}{P_A\ + P_B }$

$= \frac{180}{180\ + 420 } = 0.30$

And mole fraction of liquid B = 0.70

Question 2.9 Vapour pressure of pure water at $298 \; K$ is of urea is dissolved in of water. Calculate the vapour pressure of water for this solution and its relative lowering.

Answer :

Given that vapour pressure of pure water,

Moles of water :

$= \frac{850}{18} = 47.22$

Moles of urea :

$= \frac{50}{60} = 0.83$

Let the vapour pressure of water be p _w .

By Raoult's law, we get :

$\frac{p^{\circ}_w - p_w}{p^{\circ}_w} = \frac{n_2}{n_1\ + n_2}$

or $\frac{23.8 - p_w}{23.8} = \frac{0.83}{47.22\ + 0.83}=0.0173$

or p _w = 23.4 mm of Hg.

Relative lowering :- Hence, the vapour pressure(v.P) of water in the solution = 23.4 mm of Hg

and its relative lowering = 0.0173.

Question 2.10 Boiling point of water at is $99.63^{\circ}C$ . How much sucrose is to be added to of water such that it boils at

Answer :

Here we will use the formula :

$\Delta T_b = \frac{K_b\times1000\times w_2}{M_2\times w_1}$

Elevation in temperature = 100 - 99.63 = 0.37

K _b = 0.52 ;

Putting all values in above formula, we get :

$w_2 = \frac{0.37\times342\times500}{0.52\times1000}= 121.67\ g$

Thus 121.67 g of sucrose needs to be added.

Question 2.11 Calculate the mass of ascorbic acid (Vitamin C, ) to be dissolved in of acetic acid to lower its melting point by .

Answer :

Elevation in melting point = 1.5 degree celsius.

Here we will use the following equation :

$\Delta T_b = \frac{K_b\times 1000\times w_2}{M_2\times w_1}$

Putting given values in the above equation :

$w_2 = \frac{1.5\times176\times75}{3.9\times1000} = 5.08\ g$

Thus 5.08 ascorbic acid is needed for required condition.

Question 2.12 Calculate the osmotic pressure in pascals exerted by a solution prepared by dissolving of polymer of molar mass in $450\; mL$ of water at $37^{\circ}C.$

Answer :

We know that :

$Osmotic\ Pressure = \Pi = \frac{n}{v}RT$

We are given with :-

$Moles\ of\ polymer = \frac{1}{185000}$

Volume, V = 0.45 L

Thus osmotic pressure :

$= \frac{\frac{1}{185000}\times8.314\times10^3\times310}{0.45} = 30.98\ Pa$

NCERT solutions for class 12 chemistry chapter 2 Solutions : Exercises

Q.2.1 Define the term solution. How many types of solutions are formed? Write briefly about each type with an example.

Solution :- A solution is a homogeneous mixture of two or more non-reacting substances. It has two components :- solute and solvent.

Types of solutions are given below :-

1594728341700

Q.2.2 Give an example of a solid solution in which the solute is a gas.

Answer:

Solution of hydrogen in palladium is such an example in which solute is a gas and solvent is solid.

Q.2.3(i) Define the following terms:

Mole fraction

Answer :

Mole fraction is defined as the ratio of number of moles of a component and total number of moles in all components.

i.e.,

Q.2.3(ii) Define the following terms:

Molality

Answer :

It is defined as the number of moles of solute dissolved per kg (1000g) of solvent

i.e., $Molality = \frac{Number\ of\ moles\ of\ solute}{Mass\ of\ solvent\ in\ Kg}$

It is independent of temperature.

Q2.3(iii) Define the following terms:

Molarity

Answer :

Molarity is defined as number of moles of solute dissolved per litre(or 1000ml) of solution.

i.e., $Molarity = \frac{No.\ of\ moles\ of\ solute}{Volume\ of\ solution\ in\ litre}$

It depends on temperature because volume is dependent on temperature.

Q2.3(iv) Define the following terms:

Mass percentage.

Answer :

Mass percentage is defined as the percentage ratio of mass of one component to the total mass of all the components.

i.e., $Mass\ percentage = \frac{Mass\ of\ a\ component}{Total\ mass\ of\ solution}\times100$

Q2.4 Concentrated nitric acid used in laboratory work is nitric acid by mass in aqueous solution. What should be the molarity of such a sample of the acid if the density of the solution is

Answer :

According to given question, in 100 g of solution 68 g is nitric acid and rest is water.

So moles of 68 g HNO ₃ :-

$=\ \frac{68}{63} = 1.08$

Density of solution is given to be 1.504.

So volume of 100 g solution becomes :-

$=\ \frac{100}{1.504} = 66.49\ mL$

Thus, molarity of nitric acid is :

$Molarity = \frac{1.08}{\frac{66.49}{1000}} = 16.24\ M$

Q2.5 A solution of glucose in water is labelled as $10\%$ w/w, what would be the molality and mole fraction of each component in the solution? If the density of solution is then what shall be the molarity of the solution?

Answer :

According to question, $10\%$ mass percentage means in 100 g of solution 10 g glucose is dissolved in 90 g water.

Molar mass of glucose (C ₆ H ₁₂ O ₆ ) = $180\ g\ mol^{-1}$

So moles of glucose are :

$\frac{10}{180} = 0.056 mol$

$Moles\: of\: water = \frac{90}{18} = 5 mol$

$Molality = \frac{0.056}{0.09} = 0.62\ m$

Mole fraction :-

$\frac{0.056}{0.056+5} = 0.011$

Molarity :- Volume of 100 g solution :

$=\frac{100}{1.2} =83.3\ mL$

$Molarity = \frac{0.056}{83.33\times10^{-3}} =0.67\ M$

Q2.6 How many mL of $0.1\; M\; HCl$ are required to react completely with mixture of and containing equimolar amounts of both?

Answer :

Total amount of mixture of Na ₂ CO ₃ and NaHCO ₃ = 1 g.

Let the amount of Na ₂ CO ₃ be x g.

So the amount of NaHCO ₃ will be equal to (1 - x) g.

$Molar\ mass\ of\ Na_2CO_3 = 106\ ;\ molar\ mass\ of\ NaHCO_3 = 84$

Now it is given that it is an equimolar mixture.

So, Moles of Na ₂ CO ₃ = Moles of NaHCO ₃ .

or $\frac{x}{106} = \frac{1-x}{84}$

or x = 0.558 g

and

1643795505182

It is clear that for 1 mol of Na ₂ CO ₃ 2 mol of HCl is required, similarly for 1 mol of NaHCO ₃ 1 mol of HCl is required.

So number of moles required of HCl = 2(0.00526) + 0.0053 = 0.01578 mol

It is given that molarity of HCl is 0.1 which means 0.1 mol of HCl in 1l of solution.

Thus required volume :

$= \frac{0.01578}{0.1} = 0.1578\ l = 157.8\ mL$

Q2.7 A solution is obtained by mixing of $25\%$ solution and of $40\%$ solution by mass. Calculate the mass percentage of the resulting solution.

Answer :

According to question we have 2 solute,

Solute 1. : $25\%$ of 300 g gives :

$\frac{25}{100}\times300 = 75\ g$

Solute 2. : $40\%$ of 400 g gives :

$\frac{40}{100}\times400 = 160\ g$

So total amount of solute = 75 + 160 = 235 g.

Thus mass percentage of solute is :

$= \frac{235}{700}\times100 = 33.5\%$

and mass percentage of water

Q2.8 An antifreeze solution is prepared from of ethylene glycol and of water. Calculate the molality of the solution. If the density of the solution is then what shall be the molarity of the solution?

Answer :

For finding molality we need to find the moles of ethylene glycol.

Moles of ethylene glycol :

$= \frac{222.6}{62}= 3.59\ mol$

We know that :

$Molality = \frac{Moles\ of\ ethylene\ glycol}{Mass\ of\ water}\times100$

$= \frac{3.59}{200}\times100 = 17.95\ m$

Now for molarity :-

Total mass of solution = 200 + 222.6 = 422.6 g

Volume of solution

$= \frac{422.6}{1.072}= 394.22\ mL$

So molarity :-

$= \frac{3.59}{394.22}\times1000= 9.11\ M$

Q2.9(i) A sample of drinking water was found to be severely contaminated with chloroform supposed to be a carcinogen. The level of contamination was (by mass):

express this in percent by mass

Answer :

We know that 15 ppm means 15 parts per million.

Required percent by mass :

$= \frac{Mass\ of\ chlorofoam}{Total\ mass}\times100$

$= \frac{15}{10^6}\times100 = 1.5\times10^{-3}\%$

Q2.9(ii) A sample of drinking water was found to be severely contaminated with chloroform supposed to be a carcinogen. The level of contamination was (by mass):

determine the molality of chloroform in the water sample.

Answer :

Moles of chloroform :

$=\frac{15}{119.5} = 0.1255\ mol$

Mass of water is $10^6$ . (Since contamination is 15 ppm)

So molality will be :

$=\frac{0.1255}{10^6}\times1000 = 1.255\times10^{-4}\ m$

Q2.10 What role does the molecular interaction play in a solution of alcohol and water?

Answer :

Both alcohol and water individually have strong hydrogen bonds as their force of attraction. When we mix alcohol with water they form solution due to the formation of hydrogen bonds but they are weaker as compared to hydrogen bonds of pure water or pure alcohol.

Thus this solution shows a positive deviation from the ideal behaviour.

Q2.11 Why do gases always tend to be less soluble in liquids as the temperature is raised?

Answer:

It is known that dissolution of gas in a liquid is an exothermic process. So, by Le Chatelier principle we know that equilibrium shifts backwards as we increase temperature in case of exothermic process. Thus gases always tend to be less soluble in liquids as the temperature is raised.

Q2.12 State Henry’s law and mention some important applications.

Answer :

According to Henry's law at a constant temperature, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas present above the surface of solution or liquid.

i.e., p = k _h x, Here k _h is Henry’s law constant.

Some of its applications are as follows:-

(a) We can increase the solubility of CO ₂ in soft drinks, the bottle is sealed under high pressure.

(b) To avoid bends (due to blockage of capillaries) and the toxic effects of high concentrations of nitrogen in the blood, the tanks used by scuba divers are filled with air diluted with helium (11.7% helium, 56.2% nitrogen and 32.1% oxygen).

(c) The partial pressure of oxygen is less at high altitudes than that at the ground level. This leads to low concentrations of oxygen in the blood and tissues climbers. Due to low blood oxygen, climbers become weak and unable to think clearly which are symptoms of a condition known as anoxia.

Q2.13 The partial pressure of ethane over a solution containing of ethane is 1 bar. If the solution contains of ethane, then what shall be the partial pressure of the gas?

Answer :

Using Henry's Law we can write,

$m = k.P$

Putting value in this equation, we get :

$6.56\times10^{-3} = k\times 1$

So, the magnitude of k is _.

Now, we will again use the above equation for _.

So the required partial pressure is :-

$p = \frac{m}{k} = \frac{5.0\times10^{-2}}{6.56\times10^{-3}}$

or $p = 7.62\ bar$

Q2.14 What is meant by positive and negative deviations from Raoult's law and how is the sign of related to positive and negative deviations from Raoult's law?

Answer :

Positive and negative deviation: - A non-ideal solution is defined as a solution which does not obey Raoult’s law over the entire range of concentration i.e., and . The vapour pressure of these solutions is either higher or lower than that expected by Raoult’s law. If vapour pressure is higher, the solution shows a positive deviation and if it is lower, it shows a negative deviation from Raoult’s law.

Enthalpy relation to positive and negative deviation can be understood from the following example:-

Consider a solution made up of two components - A and B. In the pure state the intermolecular force of attraction between them are A-A and B-B. But when we mix the two, we get a binary solution with molecular interaction A-B.

If A-B interaction is weak than A-A and B-B then enthalpy of reaction will be positive thus reaction will tend to move in a backward direction. Hence molecules in binary solution will have a higher tendency to escape. Thus vapour pressure increases and shows positive deviation from the ideal behaviour.

Similarly, for negative deviation, A-B interaction is stronger than that of A-A and B-B.

Q2.15 An aqueous solution of $2\%$ non-volatile solute exerts a pressure of 1.004 bar at the normal boiling point of the solvent. What is the molar mass of the solute?

Answer :

It is given that $2\%$ of aq. solution. This means 2 g of non-volatile solute in 98 g of H ₂ O.

Also the vapour of water at normal boiling point = 1.013 bar.

Using Raoult's law :

$\frac{p_w^{\circ} - p}{p_w^{\circ}} = \frac{w_2.M_1}{w_1.M_2}$

So we get :

$M_2 = \frac{2\times18\times1.013}{0.009\times98} = 41.35\ g\ mol^{-1}$

Thus the molar mass of non-volatile solute is 41.35 unit.

Q2.16 Heptane and octane form an ideal solution. At $373\; K$ , the vapour pressures of the two liquid components are $105.2\; kPa$ and $46.8\; kPa$ respectively. What will be the vapour pressure of a mixture of of heptane and of octane?

Answer :

Vapour pressure of heptane =

and vapour pressure of octane =

Firstly we will find moles of heptane and octane so that we can find vapour pressure of each.

Molar mass of heptane = 7(12) + 16(1) = 100 unit.

and molar mass of octane = 8(12) + 18(1) = 114 unit.

So moles of heptane :

$\frac{26}{100} = 0.26$

and moles of octane :

$\frac{35}{114} = 0.31$

Mole fraction of heptane = 0.456 and mole fraction of octane = 0.544

Now we will find the partial vapour pressure:-

(i) of heptane :-

(ii) of octane :- $p_o = 0.544\times46.8 = 25.46\ KPa$

So total pressure of solution = $p_h+p_o$

= 47.97 + 25.46 = 73.43 KPa

Q2.17 The vapour pressure of water is $12.3 \; k Pa$ at $300 \; K.$ Calculate vapour pressure of 1 molal solution of a non-volatile solute in it.

Answer :

It is asked the vapour pressure of 1 molal solution which means 1 mol of solute in 1000 g H ₂ O.

Moles in 1000g of water = 55.55 mol. (Since the molecular weight of H ₂ O is 18)

Mole fraction of solute :

$\frac{1}{1+55.55} = 0.0177$

Applying the equation :

$\frac{p_w^{\circ} - p}{p_w^{\circ}} = x_2$

or $\frac{12.3 - p}{12.3} = 0.0177$

or $p = 12.083\ KPa$

Thus the vapour pressure of the solution is 12.083 KPa

Q2.18 Calculate the mass of a non-volatile solute which should be dissolved in octane to reduce its vapour pressure to $80\%$ .

Answer :

Let the initial vapour pressure of octane = $p_o^{\circ}$ .

After adding solute to octane, the vapour pressure becomes :

$=\frac{80}{100}\times p_o^{\circ} = 0.8p_o^{\circ}$

Moles of octane :

$= \frac{114}{114} = 1$ $\left ( Molar\ mass\ of\ octane = 8(12) + 18(1) = 114\ g\ mol^{-1} \right )$

Using Raoult's law we get :

$\frac{p_o^{\circ} - p}{p_o^{\circ}} = x_2$

or $\frac{p_o^{\circ} -0.8p_o^{\circ} }{p_o^{\circ}} = \frac{\frac{W}{40}}{\frac{W}{40}+1}$

or $w = 10\ g$

Thus required mass of non-volatile solute = 10g.

Q2.19(i) A solution containing 30 g of non-volatile solute exactly in of water has a vapour pressure of $2.8\; k\; Pa$ at $298 \; K.$ . Further, of water is then added to the solution and the new vapour pressure becomes $2.9\; kPa$ at $298\; K.$ . Calculate:

molar mass of the solute

Answer :

In this question we will find molar mass of solute by using Raoult's law .

Let the molar mass of solute is M.

Initially we have 30 g solute and 90 g water.

Moles of water :

$\frac{90}{18} = 5\ mol$

By Raoult's law we have :-

$\frac{p_w^{\circ} - p}{p_w^{\circ}} = \frac{n_2}{n_1+n_2}$

or $\frac{p_w^{\circ} - 2.8}{p_w^{\circ}} = \frac{\frac{30}{M}}{5+\frac{30}{M}} = \frac{30}{5M+30}$

or $\frac{p_w^{\circ} }{2.8} = \frac{5M+30}{5M}$ ------------------------------ (i)

Now we have added 18 g of water more, so the equation becomes:

Moles of H ₂ O :

$\frac{90+18}{18} = 6\ mol$

Putting this in above equation we obtain :-

$\frac{p_w^{\circ} - 2.9}{p_w^{\circ}} = \frac{\frac{30}{M}}{6+\frac{30}{M}} = \frac{30}{6M+30}$

or $\frac{p_w^{\circ} }{2.9} = \frac{6M +30}{6M}$ -----------------------------------(ii)

From equation (i) and (ii) we get

M = 23 u

So the molar mass of solute is 23 units.

Q2.19(ii) A solution containing $30\; g$ of non-volatile solute exactly in $90\; g$ of water has a vapour pressure of $2.8\; kPa$ at $298 \; K$ Further, $18 \; g$ of water is then added to the solution and the new vapour pressure becomes $2.9 \; kPa$ at $298 \; K.$ Calculate

vapour pressure of water at 298 K.

Answer :

In the previous part we have calculated the value of molar mass the Raoul's law equation.

We had :-

$\frac{p_w^{\circ} }{2.8} = \frac{5M+30}{5M}$

Putting M = 23 u in the above equation we get,

$\frac{p_w^{\circ} }{2.8} = \frac{5(23)+30}{5(23) } =\frac{145}{115}$

or $p_w^{\circ} =3.53$

Thus vapour pressure of water = 3.53 kPa.

Q2.20 A $5\%$ solution (by mass) of cane sugar in water has freezing point of $271 K.$ Calculate the freezing point of $5\%$ glucose in water if freezing point of pure water is $273.15 \; K.$

Answer :

It is given that freezing point of pure water is 273.15 K.

So, elevation of freezing point = 273.15 - 271 = 2.15 K

$5\%$ solution means 5 g solute in 95 g of water.

Moles of cane sugar :

$= \frac{5}{342} = 0.0146$

Molality :

$= \frac{0.0146}{0.095} = 0.1537$

We also know that -

or $k_f = \frac{\Delta T_f}{m} = 13.99\ K\ Kg\ mol^{-1}$

Now we will use the above procedure for glucose.

$5\%$ of glucose means 5 g of gluocse in 95 g of H ₂ O.

Moles of glucose :

$\frac{5}{180} = 0.0278$

Thus molality :

$= \frac{.0278}{0.095} = 0.2926\ mol\ kg^{-1}$

So, we can find the elevation in freezing point:

$\Delta T_f = k_f \times m$

$= 13.99 \times 0.2926 = 4.09\ K$

Thus freezing point of glucose solution is 273.15 - 4.09 = 269.06 K.

Q2.21 Two elements A and B form compounds having formula AB ₂ and AB ₄ . When dissolved in 20 g of benzene of AB ₂ lowers the freezing point by $2.3\; K$ whereas of AB ₄ lowers it by $1.3\; K$ . The molar depression constant for benzene is Calculate atomic masses of A and B.

Answer :

In this question we will use the formula :

$\Delta T_f = k_f \times m$

Firstly for compound AB ₂ :-

$M_B = \frac{K_f\times W_b \times 1000}{w_A\times \Delta T_f}$

or $= \frac{5.1\times 1 \times 1000}{20\times 2.3} = 110.87\ g/mol$

Similarly for compound AB ₄ :-

$M_B= \frac{5.1\times 1 \times 1000}{20\times 1.3} = 196\ g/mol$

If we assume atomic weight of element A to be x and of element B to be y, then we have :-

x + 2y = 110.87 ----------------- (i)

x + 4y = 196 ----------------- (ii)

Solving both the equations, we get :-

x = 25.59 ; y = 42.6

Hence atomic mass of element A is 25.59u and atomic mass of element B is 42.6u.

Q2.22 At 36 g of glucose present in a litre of its solution has an osmotic pressure of $4.98\; bar.$ If the osmotic pressure of the solution is $1.52\; bars$ at the same temperature, what would be its concentration?

Answer :

According to given conditions we have same solution under same temperature. So we can write :

$\frac{\Pi _1}{C_1} = \frac{\Pi _2}{C_2}$ $\left ( \Pi = C.R.T\ ; RT = \frac{\Pi }{C} \right )$

So, if we put all the given values in above equation, we get

$\frac{4.98}{\frac{36}{180}} = \frac{1.52}{C_2}$

or $C_2 = \frac{1.52\times36}{4.98\times180} = 0.061 M$

Hence the required concentration is 0.061 M.

Q2.23(i) Suggest the most important type of intermolecular attractive interaction in the following pairs.

n-hexane and n-octane

Answer :

Since both the compounds are alkanes so their mixture has van der Waal force of attraction between compounds.

Q2.23(ii) Suggest the most important type of intermolecular attractive interaction in the following pairs.

Answer :

The binary mixture of these compounds has van der Waal force of attraction between them.

Q2.23(iii) Suggest the most important type of intermolecular attractive interaction in the following pairs.

Answer :

The given compounds will have ion-dipole interaction between them.

Q2.23(iv) Suggest the most important type of intermolecular attractive interaction in the following pairs.

$methanol\; and\; acetone$

Answer :

Methanol has -OH group and acetone has ketone group. So there will be hydrogen bonding between them.

Q2.23(v) Suggest the most important type of intermolecular attractive interaction in the following pairs.

acetonitrile and acetone

Answer :

They will have dipole-dipole interaction since both are polar compounds.

Q2.24 Based on solute-solvent interactions, arrange the following in order of increasing solubility in n-octane and explain.

Cyclohexane, KCl, CH3OH, CH3CN.

Answer :

The order will be : Cyclohexane > CH ₃ CN > CH ₃ OH > KCl

In this, we have used the fact that like dissolves like.

Since cyclohexane is an alkane so its solubility will be maximum.

Q2.25(i) Amongst the following compounds, identify which are insoluble, partially soluble and highly soluble in water?

phenol

Answer :

We know the fact that like dissolves in like.

Since phenol is had both polar and non-polar group so it is partially soluble in water.

Q2.25(ii) Amongst the following compounds, identify which are insoluble, partially soluble and highly soluble in water?

toluene

Answer :

Since toluene is a non-polar compound i.e., it doesn't have any polar group so it is insoluble in water. (because water is a polar compound)

Q2.25(iii) Amongst the following compounds, identify which are insoluble, partially soluble and highly soluble in water?

formic acid

Answer :

Since the -OH group in formic acid (polar) can form H-bonds with water thus it is highly soluble in water.

Q2.25(iv) Amongst the following compounds, identify which are insoluble, partially soluble and highly soluble in water?

ethylene glycol

Answer :

Ethylene glycol is an organic compound but is polar in nature. Also, it can form H-bonds with water molecules, thus it is highly soluble in water.

Q2.25(v) Amongst the following compounds, identify which are insoluble, partially soluble and highly soluble in water?

chloroform

Answer :

Chloroform is a non-polar compound so it is insoluble in water.

Q2.25(vi) Amongst the following compounds, identify which are insoluble, partially soluble and highly soluble in water?

pentanol

Answer :

Pentanol has both polar and non-polar groups so it is partially soluble in water.

Q2.26 If the density of some lake water is $1.25g\; mL^{-1}$ and contains $92\; g$ of $Na^{+}\; ions$ per kg of water, calculate the molality of $Na^{+}\; ions$ in the lake.

Answer :

We know that, Molality :

$Molality = \frac{Moles\ of\ solute}{Mass\ of\ solvent\ in\ Kg}$

So, for moles of solute we have :

$Moles\ of\ Na^+ = \frac{92}{23} = 4$

Thus, molality :

$= \frac{4}{1} = 4$

Molality of Na ⁺ ions is 4m.

Q2.27 If the solubility product of $CuS$ is $6\times10^{-16}$ , calculate the maximum molarity of $CuS$ in aqueous solution.

Answer :

We are given,

The dissociation equation of CuS is given by :-

1649230202725

So, the equation becomes :-

or $K_{sp} = s\times s = s^2$

or $s = 2.45\times 10^{-8}\ M$

Thus maximum molarity of solution is $2.45\times 10^{-8}\ M$ .

Q2.28 Calculate the mass percentage of aspirin in acetonitrile when of is dissolved in of .

Answer :

Total mass of solution = Mass of aspirin + Mass of acetonitrile = 6.5 + 450 = 456.5 g.

We know that :

$Mass\ percentage = \frac{Mass\ of\ solute }{Mass\ of\ solution}\times100$

So, $Mass\ percentage = \frac{6.5 }{456.5}\times100 = 1.42\%$

Thus the mass percentage of aspirin is $1.42\%$

Q2.29 Nalorphene , similar to morphine, is used to combat withdrawal symptoms in narcotic users. Dose of nalorphene generally given is $1.5 \; mg.$ Calculate the mass of $1.5 -10^{-3} m$ aqueous solution required for the above dose.

Answer :

We are given with molality of the solution, so we need to find the moles of Nalorphene.

Molar mass of nalorphene = 19(12) + 21(1) + 1(14) + 3(16) = 311u.

So moles of nalorphene :

$\frac{1.5\times10^{-3}}{311} = 4.82\times 10^{-6}\ moles$

Molality :

$= \frac{No.\ of\ moles\ of\ solute}{Mass\ of\ solvent\ in\ kg}$

or $1.5\times 10^{-3} = \frac{4.82\times 10^{-6}}{w}$

or $w = 3.2\times 10^{-3}\ Kg$

So the required weight of water is 3.2 g.

Q2.30 Calculate the amount of benzoic acid required for preparing $250\; mL$ of $0.15 \; M$ solution in methanol.

Answer :

Molar mass of benzoic acid = 7(12) + 6(1) + 2(16) = 122u.

We are given with the molarity of solution.

$Molarity = \frac{Moles\ of\ solute}{Volume\ of\ solution\ in\ litre}$

or $0.15 = \frac{Moles\ of\ solute}{\frac{250}{1000}}$

or $Moles\ of\ solute= \frac{0.15\times 250}{1000} = 0.0375\ mol$

So mass of benzoic acid :

$= Moles\ of\ benzoic\ acid \times Molar\ mass$

$=0.0375\times 122 = 4.575\ g$

Hence the required amount of benzoic acid is 4.575 g.

Q2.31 The depression in freezing point of water observed for the same amount of acetic acid, trichloroacetic acid and trifluoroacetic acid increases in the order given above. Explain briefly.

Answer :

We know that depression in freezing point of water will depend upon the degree of ionisation.

The degree of ionisation will be highest in the case of trifluoroacetic acid as it is most acidic among all three.

The order of degree of ionisation on the basis if acidic nature will be:- Trifluoroacetic acid > Trichloroacetic acid > Acetic acid.

So the depression in freezing point will be reverse of the above order.

Q2.32 Calculate the depression in the freezing point of water when of is added to of water.

$K_{a}=1.4\times 10^{-3}$ , $K_{f}=1.86\; K\; kg\; mol^{-1}$

Answer :

Firstly we will find the Vant's Hoff factor the dissociation of given compound.

1643795600066

So we can write, $K_a = \frac{(Ca\times Ca)}{C(1-a)}$

or $K_a = Ca^2$ $(\because a << 1)$

or $a = \sqrt{\frac{K_a}{C}}$

Putting values of K _a and C in the last result, we get :

$a = 0.0655$

At equilibrium i = 1 - a + a + a = 1 + a = 1.0655

Now we need to find the moles of the given compound CH ₃ CH ₂ CHClCOOH.

So, moles =

$\frac{10}{122.5} = 0.0816\ mol$

Thus, molality of the solution :

$= \frac{0.0816\times1000}{250} = 0.3265\ m$

Now we will use :

$\Delta T_f = i\ K_f\ m$

or $= 1.065 \times 1.86 \times 0.3265 = 0.6467\ K$

Q2.33 of is dissolved in of water. The depression in the freezing point of water observed is $1.0^{\circ}C$ . Calculate the van’t Hoff factor and dissociation constant of fluoroacetic acid.

Answer :

Firstly we need to calculate molality in order to get vant's hoff factor.

So moles of CH ₂ FCOOH :

$\frac{19.5}{78} = 0.25$

We need to assume volume of solution to be nearly equal to 500 mL. (as 500 g water is present)

Now, we know that :

or $i = \frac{1}{0.93} = 1.0753$

Now for dissociation constant :-

$a = i - 1 = 1.0753 - 1 = 0.0753$

and, $K_a = \frac{Ca^2}{1-a}$

Put values of C and a in the above equation, we get :

$K_a = 3\times10^{-3}$

Q2.34 Vapour pressure of water at $293 \; K$ is Calculate the vapour pressure of water at $293 \; K$ when of glucose is dissolved in of water.

Answer :

Firstly we will find number of moles of both water and glucose.

Moles of glucose :

$= \frac{25}{180} = 0.139\ mol$ $(Molar\ mass\ of\ glucose = 6(12)+12(1)+6(16) = 180\ g\ mol^{-1})$

and moles of water :

$= \frac{450}{18} = 25\ mol$ $(Molar\ mass\ of\ water = 18\ g\ mol^{-1})$

Now,

$\frac{p_w^{\circ} - p}{p_w^{\circ}} = \frac{n_g}{n_g + n_w}$

or $\frac{17.535 - p}{17.535} = \frac{0.139}{0.139+ 25}$

or $p = 17.44\ mm\ of\ Hg$

Thus vapour pressure of water after glucose addition = 17.44 mm of Hg

Q2.35 Henry’s law constant for the molality of methane in benzene at $298\; K$ is _. Calculate the solubility of methane in benzene at $298\; K$ under

Answer :

We know that : $P = k\times C$

We are given value of P and k, so C can be found.

$C = \frac{760}{4.27\times10^5} = 178\times 10^{-5}$

Hence solubility of methane in benzene is $178\times 10^{-5}$ .

Q2.36 of liquid A was dissolved in of liquid B . The vapour pressure of pure liquid B was found to be $500 \; Torr.$ Calculate the vapour pressure of pure liquid A and its vapour pressure in the solution if the total vapour pressure the solution is $475 \; Torr.$

Answer :

For calculating partial vapour pressure we need to calculate mole fractions of components.

So number of moles of liquid A :

$= \frac{100}{140} = 0.714$

and moles of liquid B :

$= \frac{1000}{180} = 5.556$

Mole fraction of A (x _A ) :

$= \frac{0.714}{0.714+5.556} = 0.114$

and mole fraction of B (x _B ) :

$= \frac{5.556}{0.714+5.556} = 0.866$

Now, P _total = P _A + P _B

or $P_{total} = P_A^{\circ}x_A\ + P_B^{\circ}x_B$

or $475 = P_A^{\circ}\times0.114\ + 500\times0.886$

or $P_A^{\circ} = 280.7\ torr$

Thus vapour pressure in solution due to A =

$= 280.7 \times0.114 = 32\ torr$

Q2.37 Vapour pressures of pure acetone and chloroform at $328 \; K$ are $741.8 \; mm\; Hg$ and $638.8 \; mm\; Hg$ respectively. Assuming that they form ideal solution over the entire range of composition, plot ptotal, pchloroform, and pacetone as a function of xacetone. The experimental data observed for different compositions of mixture is:

$100 \times x_{acetone}$ 0 11.8 23.4 36.0 50.8 58.2 64.5 72.1
$p_{acetone}/mm\; Hg$ 0 54.9 110.1 202.4 322.7 405.9 454.1 521.1
$p_{chloroform}/mm\; Hg$ 632.8 548.1 469.4 359.7 257.7 193.6 161.2 120.7
$p_{total}$ 632.8 603 579.5 562.1 580.4 599.5 615.5 64.18

Plot this data also on the same graph paper. Indicate whether it has positive deviation or negative deviation from the ideal solution.

Answer :

1594728504498

it has negative deviation from the ideal solution.

Q2.38 Benzene and toluene form ideal solution over the entire range of composition. The vapour pressure of pure benzene and toluene at $300 \; K$ are and respectively. Calculate the mole fraction of benzene in vapour phase if 80 g of benzene is mixed with toluene.

Answer :

Firstly, we will find the no. of moles of the given compounds.

No. of moles of benzene :

$=\frac{80}{78} = 1.026\ mol$

and the no. of moles of toluene :

$=\frac{100}{92} = 1.087\ mol$ .

Now we will find mol fraction of both:-

Mole fraction of benzene :-

$=\frac{1.026}{1.026+1.087} = 0.486$

and mole fraction of toluene :

$=1 - 0.486 = 0.514$

Now,

P _{total =} P _b + P _t

or $= 50.71\times0.486\ + 32.06\times0.514\ = 24.65 +16.48$

or $= 41.13\ mm\ of\ Hg$

Hence mole fraction of benzene in vapour phase is given by :

$= \frac{24.65}{41.13} = 0.60$

Q2.39 The air is a mixture of a number of gases. The major components are oxygen and nitrogen with approximate proportion of $20\%$ is to $79\%$ by volume at $298 \; K$ . The water is in equilibrium with air at a pressure of $10 \; atm.$ At $298 \; K$ . if the Henry’s law constants for oxygen and nitrogen at $298 \; K$ are $3.30\times 107 \; mm$ and $6.51\times 107 \; mm$ respectively, calculate the composition of these gases in water

Answer :

We have been given that the water is in equilibrium with air at a pressure of 10 atm or 7600 mm of Hg.

So the partial pressure of oxygen :

$\frac{20}{100}\times7600 = 1520\ mm\ of\ Hg$

and partial pressure of nitrogen :

$\frac{79}{100}\times7600 = 6004\ mm\ of\ Hg$

Now, by Henry's Law :

$P = K_h.x$

For oxygen :

$x = \frac{1520}{3.30\times10^{7}} = 4.61\times 10^{-5}$

For nitrogen :

$x = \frac{6004}{6.51\times10^{7}} = 9.22\times 10^{-5}$

Hence the mole fraction of nitrogen and oxygen in water is $9.22\times 10^{-5}$ and $4.61\times 10^{-5}$ respectively.

Q2.41 Determine the amount of $CaCl_{2}$ $(i=2.47)$ dissolved in $2.5\; litre$ of water such that its osmotic pressure is $0.75 \; atm$ at $27^{\circ}C$ .

Answer :

We know that osmotic pressure :

$\Pi = i\ (\frac{n}{v})\ R\ T$

or $\Pi = i\ (\frac{w}{M\ v})\ R\ T$

We have been given the values of osmotic pressure, V, i and T.

So the value of w can be found.

$w = \frac{0.75\times111\times2.5}{2.47\times0.0821\times300}$ $(M = 1\times40 + 2\times 35.5 = 111\ g\ mol^{-1})$

$= 3.42\ g$

Hence 3.42 g CaCl ₂ is required.

Q2.41 Determine the osmotic pressure of a solution prepared by dissolving of in $2\; litre$ of water at assuming that it is completely dissociated.

Answer :

Dissociation of K ₂SO ₄ is as follows :-

1643795658197 It is clear that 3 ions are produced, so the value of i will be 3.

Molecular weight of K ₂ SO ₄ = 2(39) + 1(32) + 4(16) = 174u.

$\Pi = i\ C\ R\ T$

Putting all the values :-

$\Pi =\frac{3 \times 25 \times 10-3 \times 0.082 \times 298}{174\times2}$

$= 5.27\times10^{-3}\ atm$

More About Class 12 Chemistry Chapter 2 Solutions

NCERT Class 12 Chemistry chapter 2 solutions mainly discuss questions based on liquid solutions and their properties. The NCERT solutions for Class 12 Chemistry chapter 2 Solutions also cover other questions based on important concepts like types of solutions, Raoult's law and Henry's law, the concentration of solutions in different units, solubility, the vapour pressure of liquid solutions, ideal and non-ideal solutions, colligative properties, determination of molar mass and abnormal molar masses.

$Molality(m)=\frac{Number \:of \:moles \:of \:solute}{Weight\:of\:solvent(kg)}$
$Molarity(N)=\frac{Number \:of \:moles \:of \:solute}{Volume\:of\:solution(kg)}$
$Normality(N)=\frac{Number \:of \:gram\:equivalent \:of \:solute}{Volume\:of\:solution(kg)}$

Topics and Sub-topics of NCERT Class 12 Chemistry Chapter 2 Solutions-

2.1Types of Solutions

2.2 Expressing Concentration of Solutions

2.3 Solubility

2.4 Vapour Pressure of Liquid Solutions

2.5 Ideal and Non-ideal Solutions

2.6 Colligative Properties and Determination of Molar Mass

2.7 Abnormal Molar Masses

This chapter of class 12 NCERT solutions is the second chapter of NCERT Class 12. It basically introduces basic concepts related to concentration, molarity, molality, mole fraction, Raoult's law, henry law, vapour pressure, colligative properties etc. NCERT solutions for Class 12 Chemistry Chapter 2 is an extension of chapter 1 class 11 NCERT also known as some basic concepts of chemistry. Class 12 NCERT solutions is very useful in the subsequent chapters like thermodynamics and Equilibrium etc. Ch 2 Chemistry Class 12 is very easy if basic concepts are understood well. Students can score decent marks in this chapter as most of the questions are form colligative properties and vapour pressure concepts which are easy to comprehend in the examination. Apart from NCERT, students can refer class notes for Chemistry Class 12 Chapter 2 to revise and score well in the final board examination as well as competitive exams.

Class 12 NCERT solutions has good amount of weightage in exams like NEET and JEE as well. Class 12 Chemistry Chapter 2 solutions is must read for the 12th class students. Most of the concepts like Molarity, molality, mole fraction, percentage composition etc. have been discussed in class 11 only, hence it is not very difficult to grasp the subsequent topics Henrys law, Colligative properties. Hence it is generally recommended to study class 11 chapters well before entering class 12th as heavy portion of syllabus is interlinked. Ch 2 Chemistry Class 12 solutions will take 8-10 hours to complete if all the concepts of 11th class are well read.

NCERT Exemplar Class 12 Solutions

NCERT Exemplar Class 12 Chemistry Solutions

NCERT Exemplar Class 12 Mathematics Solutions

NCERT Exemplar Class 12 Biology Solutions

NCERT Exemplar Class 12 Physics Solutions

NCERT solutions for class 12 chemistry

Chapter 1	The Solid State
Chapter 2	Solutions
Chapter 3	Electrochemistry
Chapter 4	Chemical Kinetics
Chapter 5	Surface chemistry
Chapter 6	General Principles and Processes of isolation of elements
Chapter 7	The P-block elements
Chapter 8	The d and f block elements
Chapter 9	Coordination compounds
Chapter 10	Haloalkanes and Haloarenes
Chapter 11	Alcohols, Phenols, and Ethers
Chapter 12	Aldehydes, Ketones and Carboxylic Acids
Chapter 13	Amines
Chapter 14	Biomolecules
Chapter 15	Polymers
Chapter 16	Chemistry in Everyday life

NCERT solutions for class 12 subject wise

NCERT Solutions for class 12 biology

NCERT solutions for class 12 maths

NCERT solutions for class 12 chemistry

NCERT Solutions for class 12 physics

Benefits of NCERT Solutions for Class 12 Chemistry Chapter 2 Solutions

Hope you have understood well with the help of the free NCERT class 12 Chemistry chapter 2 solutions provided here.
After completing NCERT solutions for class 12 chemistry chapter 2 Solutions, students will be able to differentiate between the types of solutions characteristics of ideal and non-ideal solutions, define solubility and colligative properties, understand abnormal molar mass.
NCERT class 12 Chemistry chapter 2 pdf which you read here will also help you in building your concepts as well as a strong base in the subject. These will also help you in various competitive exams.
With the help of these NCERT class 12 Chemistry chapter 2 solutions pdf download, you will be able to write answers well.

Happy Learning!!

Solutions

Frequently Asked Question (FAQs) - NCERT Solutions for Class 12 Chemistry Chapter 2 Solutions

Question: What are the important topics of this chapter?

Answer:

Henry’s law
Solubility of gases in liquids
Colligative properties
Raoult's law
Relative lowering of vapour pressure
Elevation of boiling point
Osmotic pressure
Abnormal molecular mass
Van't Hoff factor

Question: Where can I find complete solutions of NCERT syllabus Class 12 Chemistry?

Answer:

For complete solutions : https://school.careers360.com/ncert/ncert-solutions-class-12-chemistry

Question: What is the weightage of NCERT book Class 12 Chemistry chapter 2 in JEE Mains?

Answer:

4 marks questions can be expected. Practice JEE Main previous year papers to understand the question type asked.

Question: What is the weightage of NCERT class 12 Chemistry chapter 2 in NEET?

Answer:

Weightage of solutions is 5% . For good score follow NCERT textbook and solve NEET previous year papers.

Latest Articles

Assam HS Result 2022 - Assam 12th result 2022 @resultsassam.ni...

Assam HS Result 2022 - Assam Higher Secondary Education Counci...

1 day ago

GSEB HSC Result 2022 (Declared) - Check Gujarat Board Class 12...

GSEB HSC Result 2022 - Gujarat Secondary and Higher Secondary ...

1 day ago

GSEB HSC Commerce Result 2022 (Declared) - Check Repeater, Pri...

GSEB HSC Commerce Result 2022 - Gujarat Board has declared the...

1 day ago

GSEB HSC Science Result 2022 Declared - Check Result at gseb.org

GSEB HSC Science Result 2022 - Gujarat Secondary And Higher Se...

1 day ago

GSEB HSC Arts Result 2022 (Declared) - Gujarat Board 12th Arts...

GSEB HSC Arts Result 2022 - Gujarat Board has released Class 1...

1 day ago

RBSE 12th Commerce Result 2022 (Declared) - Check result at ra...

RBSE 12th Commerce Result 2022 Date - Rajasthan Board of Secon...

1 day ago

RBSE 12th Science Result 2022 (Declared) - Check result @rajre...

RBSE 12th Science Result 2022 - Board of Secondary Education, ...

1 day ago

Odisha CHSE Result 2022 - Odisha Board 12th Result @ chseodish...

Odisha CHSE Result 2022 - CHSE, Odisha will release the Odisha...

2 days ago

KVPY Result 2022 (Released) - Check SA, SX & SB Streams Result...

KVPY Result 2022 - The result of KVPY for SA, SX, and SB strea...

2 days ago

AP Open Inter Results 2022 (Out)- AP Open School Class 12th Re...

AP Open Inter Results 2022 - Andhra Pradesh Open School Societ...

2 days ago

View All Latest Articles

Explore Popular Degree, Branches and Courses

Questions related to CBSE Class 12th

Showing 146 out of 146 Questions

7 Views

pls tell correct info about compartment and improvement exams 2022. pls o want to know all the processes. pleasw

Devyanshi Sharma 23rd Jun, 2022

Hello,if you are from cbse board then your compartment exams will be organised by the central Board of secondary education.These examinations are held for those students who will not clear the class 10th or class 12th exam in one or two subjects.Cbse has a provision for providing three chances to clear the compartment exam.If you are not able to clear your exams or secure good grades even after three attempts you are considered failed .Both private and regular students can apply for cbse compartment examination.For class 10th compartment examinations will begin from 25th August and end on 8th of September whereas for class 12th students examinations will begin from 25th August and end on 15th September.The application form is different for every individual hailing from different categories.If you are a regular student who appeared in class 12th examinations during the month of April/June and their result is declared compartment are eligible to appear for compartment examinations.if you have failed in more than one subject then you will have to appear for two subjects in which you faced compartment.If you were not able to clear one subject you can appear for compartment examinations under the improvement of performance category.Regular students may habe to go to the school and enquire about compartment examinations whereas private students can easily apply through the cbse site .

This is the criteria i have told you for the cbse board.If you are from any other board like hp board,up board or Maharashtra board,let me know and i would enlighten you with the knowledge i have regarding the compartment examinations held by these boards

42 Views

if someone got 80% in term one, passed term 2 practical but failed in term 2 theory cbse class 12th will they be considered pass or fail in 12th?

prashant kumar 11th Jun, 2022

See , frankly speaking, this year many new guidelines have been issued by the C.B.S.E . So , it will be better if you wait for the results to be declared. If , you are failing in one or two subjects, you can again give the exam this year and pass it .

40 Views

I want to take a admission in class 12 privately.. so can I???

Parvati Solanki 2nd Jun, 2022

Yes, you can take admission in class 12th privately there are many colleges in which you can give 12th privately.

70 Views

Im in class 12 CBSE right now. I feel Im going to fail in my core subjects because of my weak preparation. Please guide me on what should I do in case I end up failing? Should I take private or compartment or improvement? I might fail in all 3 main subjects (PCM) or 2 subjects. Its confusing.

Pallavi 6th Jun, 2022

Hello aspirant,

--> If you fail in 2 subjects - You will be eligible for giving compartment exams of both of them. However, if you fail in 3 exams your result will be declared as - Fail. Hence, you have to repeat a year again in-order to clear 12th.

Remember that life doesn't end, if you haven't passed your 12th. There are lot of options to get succeed in life.

In case you couldn't clear in Class 12, you may use your 10th standard certificate and get enrolled in diploma courses such as Mechanical Engineering, Electrical Engineering etc.

All the best!

58 Views

sir board exam 2022-23 me 30% syllabus reduce hoga?

Shivanshu 15th May, 2022

Dear aspirant !

Hope you are doing great ! No, why will it reduce ,there is no covid like situation as in the past years ,so why are you wasting your time by thinking such thoughts,no syllabus will be reduced onwards ,if covid situation arises then there may be possibility to reduce the syllabus , but as see the present situation ,no syllabus will deduct ,and also if syllabus reduced then it is not profitable for you because in neet and jee ,full syllabus comes , so if they reduce the syllabus then study full syllabus !

Hope it helps you